Use and Care Manual

Carefully read through this entire operator's manual
before using your new unit. Pay attention to all cautions
and warnings.
This unit is a gasoline engine driven chipper shredder. It
is designed to cut wood into chips. It offers quality solid
steel construction and is easy and safe to operate. With
proper use and care, it should give you many years of
dependable service.
ENGINE MANUAL
The
Engine Manufacturer
is responsible for all engine-
related issues with regards to performance, power
rating, specications, warranty and service. Please refer
to the
Engine Manufacturer’s
owner/operator’s manual,
packed separately with your unit, for more information.
EMISSION CONTROL SYSTEM
This equipment and or its engine may include exhaust
and evaporative emission control system components
required to meet U.S. Environmetal Protection Agency
(EPA) and/or California Air Resources Board (CARB)
regulations. Tampering with emission controls and
components by unauthorized personnel may result
in severe fines or penalties. Emission controls and
components can only be adjusted by an authorized
engine manufacturer's service center.
CALIFORNIA PROPOSITION 65 WARNING
Engine exhaust, some of its constituents and certain
product components contain or emit chemicals known to
the state of California to cause cancer and birth defects
or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
MODEL AND SERIAL NUMBERS
Record the model and serial number as well as date
and place of purchase for future reference. Have this
information available when ordering parts or
optional
accessories
and when making technical or warranty
inquiries.
DISCLAIMER
Yardmax reserves the right to discontinue, change,
and improve its products at any time without notice
or obligation to the purchaser. The descriptions and
specications contained in this manual were in effect at
printing. Equipment described within this manual may be
optional. Some illustration may not be applicable to your
unit.
ENVIRONMENTAL
Recycle unwanted materials instead of disposing of
them as waste. All tools, hoses and packaging should
be resorted, taken to the local recycling center and
disposed of in an environmentally safe way.
2
Chipper Shredder
YW7565
208 cc
3" diameter
21” × 14”
205 lbs
Manufacture Date:
11~201~10
2017 2018 2019
1 2 3 4 5 6
7 8 9 10 11 12
21~30
Engine Displacement:
Chipping Capacity:
Hopper Opening:
Weight:
Manufactured in China
7565100010117
Model Number
Serial Number
2
Chipper Shredder
»
Operator’s Manual
YW7565PM04 - 1710
Introduction
|