Installation Guide

1 / 6

Installation Guide

Gate Swinging In

Required tools

Parts in the box

Phillips

screwdriver

9,5 mm

3,5 mm

Latch assembly

Latch cover

Yardlock

Screws

F (12x)

Important

The following instructions are for IN-SWINGING gates. Instructions for OUT-SWINGING gates are available at www.yardlock.ca.

If you have an out-swinging gate, it is recommended that you reverse your hinges to create an in-swinging gate for added security.

PATENT PENDING

PAGE 1
Installation Guide Gate Swinging In PATENT PENDING Required tools Parts in the box Latch assembly Latch cover Yardlock #2 Screws F (12x) Phillips screwdriver 9,5 mm 3,5 mm E Important The following instructions are for IN-SWINGING gates. Instructions for OUT-SWINGING gates are available at www.yardlock.ca. If you have an out-swinging gate, it is recommended that you reverse your hinges to create an in-swinging gate for added security.
PAGE 2
/6
PAGE 3
/6
PAGE 4
/6
PAGE 5
WARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder’s hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional.