Full Product Manual

34 [e-mail]
A: Measure 59-1/4” from the inside of each (234) Beam 105-1/2” and place one Trellis End Assembly on the (080)
Arch Beam Offsets, (079) Arch Beam Centres and (195) Arch Beam Fronts. This should be centred and both ends
should hang 9-3/4” over the edges. (g. 15.1 and 15.4)
B: Attach with ve #10 x 4” Wood Screws in the places indicated in g. 15.1 and 15.2.
C: Attach Trellis Clip to (079) Arch Beam Centre with two #10 x 1-1/4” Pan Screws as shown in g. 15.1 and 15.3.
Step 15: Attach Trellis End Assemblies
Part 1
Hardware
5 x #10 x 4” Wood Screw
2 x #10 x 1-1/4” Pan Screw
Fig. 15.1
Fig. 15.3
Fig. 15.4
Both Sides of Trellis End
Assembly
Fig. 15.2
9-3/4”
Trellis End
Assembly
Arch Beam
Front
#10 x 1 1/4”
Pan Screw
(079) Arch
Beam
Centre
Trellis End
Assembly
(234) Beam
105 1/2”
#10 x 4”
Wood Screw
Trellis Clip
59 1/4”
59 1/4”
(080) Arch
Beam
Offset
(195) Arch
Beam
Front
(195) Arch
Beam
Front
(080) Arch
Beam
Offset