Full Product Manual

16 [e-mail]
Step 4: Attach Panel Posts to Corner Posts
Part 1
A: On (239) Engineered Panel Cor-
ner Post Long, per assembly, pre-drill
two holes from the inside, at the places
shown in g. 4.1 and 4.2. Pre-drill in the
centre of the panel and on a slight angle.
Fig. 4.2
Note: Only pre-drill one post per
assembly
Fig. 4.1
Step * **
pre-drill 3 holes from the centre
on a slight angle
Pre-drill
on a slight
angle
(241)
Engineered
Panel Post
Long
(239)
Engineered
Panel Corner
Post Long