WOODEN ADIRONDACK FOLDING CHAIR ASSEMBLY MANUAL
Parts List Chair assembly 2 armrests hardware pack Tools Required For The Job 5/32” Hex Key (included) *NOTE: This Hex Key is used to tighten all the screws used in the assembly process.
Step:1 Step:2 Place chair in this position on a flat surface. Fasten armrest to chair using bolt provided and by placing a bushing between the point of contact. Step:3 Step 4: Repeat step 2 on opposite side. Step 5: Fasten last armrest to back rest using lag provided. Lift back into upright position, then fasten armrest to back rest using lag provided. Place bushing between armrest and back rest. 4 Step 6: Tighten bolts with hex wrench provided and a 7/16" wrench, not provided.
Your assembly is now complete and your finished product should look like this!
