Installation Guide

3
Screen Assembly Manual. YardCra.com. 1-866-210-9273
Locate the Screen Panels. Place on the rst section as
shown. Ensure it is in against the post. And also in
between the raers at the top.
Fasten the 1x4 Holding Strip to the post with one (1) 2”
Screw into each pre-drilled hole.
Install the second Screen Panel on the next section, as
shown in step 1 & 2.
Place the Screen Panel between the raers at the top.
Fasten with a total of four (4) 2” Screws through
pre-drilled holes.
Locate the 1x4 Holding Strip. Place onto the post
between the Screen Panels. It will overlap onto the
Screen Panel.
Step # 1
Step # 6Step # 5
Step # 4Step # 3
Step # 2