Measurement Guide

63"
59
3
4
"
155
3
4
"
218
15
16
"
A
A
Detail D
E
E
(2) 2x4 SYP rafters, fasten
together w/ #8x2 1/2" screws,
and fasten to post w/ (1) 3/8"Ø
threaded rod at each post
2x4 No 1 SYP fascia, fasten to 2x4
rafter at each end w/ (2) #8x3" screws
1x4 Cedar Trim Board, fasten to
fascia board w/ (3) #8x1 5/8" screws
(4) Ply 2x8 SYP compression ring, 2nd ply fasten to 1st ply w/ #8x2 1/2"
screws, 3rd ply to 2nd ply w/ #8x3" screws, 4th ply to 3rd ply w/ #8x3"
screws, and to each ply of rafter w/ (1) #8x3" screw from bottom
(3) Ply 2x4 cedar post, (3.375"x4.125"),
fasten the 2 outside plies to inner ply
w/ #8x2 1/2" screw, outside plies of
post extend to top of rafters
(2) 2x4 No 1 SYP Ridge, fasten
together with (4) 3/8"Øx3 1/2" thru
bolts
2x4 No 1 SYP rafter,
fasten to fascia and to
ridge w/ (2) #8x3" screws
2x4 Collar Ties, Fasten
to rafters at each end
w/ (6) #8x3" Screws
Roof Framing Plan
BY: SCALE:
DATE: PAGE:
DRAWING NUMBER:
REVISIONS: DATE: BY:
COMMENTS:
PROJECT:
DRAWING TITLE:
CONTRACTOR:
191 JALYN DRIVE NEW HOLLAND, PA 17557
PH: 1-
866-210-9273
WWW.YARDCRAFT.COM
THIS DRAWING IS THE PROPERTY OF YARD CRAFT,
AND REPRODUCTION , ALTERNATION, OR USE OF
THIS DRAWING, WITHOUT THE WRITTEN CONSENT
OF YARD CRAFT, IS PROHIBITED. DRAWINGS
SHALL NOT BE SCALED TO OBTAIN DIMENSIONS.
THE CONTRACTORS/DEALERS, AND BUILDERS
INVOLVED ON THIS PROJECT SHALL VERIFY ALL
DIMENSIONS AND CONDITIONS BEFORE
STARTING WORK, AND ANY DISCEPANCY SHALL
BE REPORTED IN WRITTING BEFORE STARTING
WORK.
YardCraft
10/27/2017
JR.
1:40
Roof Framing Plan
3 of 6
17-294
12x18 Oval Cedar
Gazebo