Installation Guide

Place the Double Floor Joists as shown.

Fasten all remaining screws at these locations. Repeat Steps 19-21, to install the remaining three

Joists.

Locate the remaining Double Floor Joists.

Floor Assembly

Locate the Angle Cut Floor Band Board. Hold in

place as shown.

Push the Angled Band Board tight against the

Straight Band Board. While holding this in place,

Fasten the Floor Joist Ply to the Single Floor Joist

with 2 

Step:19 Step:20

Step:22

Step:21

Step:24

Step:23

Angle Floor

Band Board