Installation Guide

15
Fasten the ends of all remaining Deck Boards.
There will be a gap between each Deck Board.
Adjust the Deck Boards so there is an equal gap
between each Deck Board.
Align the Deck Board with the center of the
Double Floor Joist. Fasten with 2 
through pre-drilled holes. Two (2) Screws on each
side of each Floor Board.
Keeping the Deck Boards aligned with the Double
Floor Joist and keeping an equal gap between each
Deck Board, fasten both ends of all remaining
Deck Boards with two (2) 2 
pre-drilled holes.
Floor Assembly
Fasten at both ends using one (1) 2 
through Pre-Drilled Hole.
Install two (2) more Screws in the center, as
shown.
Step:55 Step:56
Step:58
Step:57
Step:60
Step:59