Specification

79
7
8
"
123
1
2
"
155
3
4
"
15
5
8
"
36"
60"
Detail B
Detail C
CROSS SECTION A-A
12
5.5
(2) 2x4 SYP Ridge, fasten together
with (4) 3/8"Øx3 1/2" thru bolts
1x6 SYP tongue & groove
decking, fasten to rafters at
each end w/ (2) 2" nails
(2) 2x4 SYP rafters, fasten
together w/ #8x2 1/2" screws,
and fasten to post w/ (1)
3/8"Ø threaded rod at each
post
1x4 Cedar Trim Board,
fasten to fascia board
w/ (3) #8x1 5/8" screws
2x4 SYP fascia, fasten to 2x4 rafter
at each end w/ #8x3" screws
(3) Ply 2x4 cedar post,
(3.375"x4.125"), fasten the 2
outside plies to inner ply w/ #8x2
1/2" screw, outside plies of post
extend to top of rafters
2x4 #1 cedar top rail, fasten to post
w/ #8x3" screws, (2) at each end,
post is notched 1/8" to accept this rail
2x3 #1 cedar bottom rail. fasten to
post w/ #8x3" screws, (2) at each end 1x3 cedar spindles
2x4 pressure treated SYP
floor Joist, fasten at each
end w/ #8x3" screws
5/4x6 cedar decking
2x4 pressure treated SYP
band Board, fasten to each
floor joist w/ (2) #8x3" screws
1x4 Cedar Trim Board,
fasten to band board
w/ (3) #8x1 5/8" screws
18 ga. Roof Bracket, fasten to
ceiling boards and rafters and
band board below w/ (16)
10d nails
2x6 cedar brace, fasten to post
and T-rail w/ (2) #8x3" screws, fasten
T-rail to post w/ (2) #8x3" screws
(4) Ply 2x8 SYP compression ring, 2nd ply
fasten to 1st ply w/ #8x2 1/2" screws, 3rd ply
to 2nd ply w/ #8x3" screws, 4th ply to 3rd ply
w/ #8x3" screws, and to each ply of rafter
w/ (1) #8x3" screw from bottom
T-Rail consisting of a 2x4 flat and 2x2 on
edge, fasten together w/ #8x2 1/2"
screws, post is notched 1/8" to accept 2x4
2x4 Collar Ties, Fasten
to rafters at each end
w/ (6) #8x3" Screws
With Floor
BY: SCALE:
DATE: PAGE:
DRAWING NUMBER:
REVISIONS: DATE: BY:
COMMENTS:
PROJECT:
DRAWING TITLE:
CONTRACTOR:
191 JALYN DRIVE NEW HOLLAND, PA 17557
PH: 1-
866-210-9273
WWW.YARDCRAFT.COM
THIS DRAWING IS THE PROPERTY OF YARD CRAFT,
AND REPRODUCTION , ALTERNATION, OR USE OF
THIS DRAWING, WITHOUT THE WRITTEN CONSENT
OF YARD CRAFT, IS PROHIBITED. DRAWINGS
SHALL NOT BE SCALED TO OBTAIN DIMENSIONS.
THE CONTRACTORS/DEALERS, AND BUILDERS
INVOLVED ON THIS PROJECT SHALL VERIFY ALL
DIMENSIONS AND CONDITIONS BEFORE
STARTING WORK, AND ANY DISCEPANCY SHALL
BE REPORTED IN WRITTING BEFORE STARTING
WORK.
YardCraft
10/27/2017
JR.
1:32
Cross Section With Floor
4 of 6
17-294
12x18 Oval Cedar
Gazebo