Installation Guide

23
Step:100 Step:101
Step:103
Step:102
Step:104
Assemble the remaining Post & Rail Sections as
shown in Steps 89-102. You will have one (1)
Section that will not have a Bottom Rail Section.
This is for the doorway.
Railing and Brace Sections installed.
Push Bottom Rail section Tight against Post Ply

pre-drilled holes.

holes.
Post and Rail Assembly
Fasten the opposite end of the Bottom Rail Section
to the second Post Ply, as shown in Steps 99-101.
Step:105
Start with the door section. Locate the Inside Post
Ply.
Inside Post Ply