Installation Guide

22
Step:94 Step:95
Step:97Step:96
Step:98
Step:99
Fasten the other end of the Brace Section to the
second Post Ply.
Brace Section installed.
Place a Bottom Rail Section between the Post
Plies, on top of the Spacer Block, as shown.
Place the Brace Section in the notch on the Outside
Post Ply.
Push Brace sections Tight against Post Ply and

holes.
Post and Rail Assembly
Place the Bottom Rail Section in the notch on the
Post Ply.
Spacer Block
Bottom Rail Section