Installation Guide

8
Notice the Angle cut on the Joist. The long point
goes against the Floor Section, and the notch
towards the center.
Reverse the Screws so the two plies come apart.
Only Do This On Two of The Double
Joists.
Double Floor Joist apart.
Place one Ply of the Floor Joist from Step 16 on
each side of the Floor Sections. See Step 18 for the
alignment of the cut on the Joist.
Floor Assembly

one (1) on each side of the Center Floor Joist.
Locate the Double Floor Joist.
Step:13 Step:14
Step:16Step:15
Step:17
Step:18
Notches
Notches
Long
Point
Against
Floor
Section