Installation Guide

38
Step:188 Step:189
Step:191Step:190
Step:192
Step:193
Tar Paper
Install all remaining Roof Trim, as shown in Step
187.
Locate the Straight Cut Tar Paper.

Then fasten to Tongue & Groove Boards using a

Fasten Tar Paper to Tongue & Groove Boards

Install the Tar Paper on the opposite side, as shown
in Steps 189-191.
Install the last Straight Cut Piece. Lay over the
Ridge onto the opposite side as shown. Fasten with
a Hammer Tacker.
Align
at the
bottom
Overlap