Installation Guide

37
Align with the corner of the Band Board.
Keeping the Roof Trim aligned with the corner,
Place a Triangle Square on top of the Tongue &
Groove Boards, and hold the Roof Trim against the
Triangle Square.
Step:182
Roof Assembly
Locate the Straight Cut Roof Trim.
Step:183
Step:184
Fasten the Roof Trim to the Band Board at each
end using one (1) 1 
pre-drilled holes.
Fasten the Roof Trim to Band Board in the center
using one (1) 1 
pre-drilled hole.
Locate the Angle Cut Roof Trim. Align with the
Straight Cut Roof Trim and using the Triangle
Square shown on Step 184, attach to Band Board
using three (3) 1 
pre-drilled holes.
Step:187
Step:186
Step:185