Installation Guide

36
Continue installing the Tongue & Groove Boards
all the way up to the top. Fasten each Tongue &

Only the Longest Tongue & Groove Board will

Roof Assembly
Step:176
Continue installing all remaining Tongue & Groove
Boards on all Roof Sections, as shown in Steps
174-177.
Step:177
Step:178
Step:179
After all Tongue & Groove Boards are installed,
locate the Hurricane Plates and bend slightly in the
center.
Place the Hurricane Plate on top of the Tongue &
Groove Boards at the Roof Splice.
Step:180
Step:181
Center the Hurricane Plate between the two roof
panels and fasten the Plate to the Rafters and the

Hurricane Plate Installed.
Install all remaining Hurricane Plates at each Roof
Panel Splice, as shown in Steps 178-180.