Installation Guide
33
Align the opposite end with the center of the Dou-
pre-drilled holes.
Continue working all the way around to install the
remaining Roof Band Boards, as shown in previous
steps. You may need to adjust the top of the Double
Rafters, to align the Band Board with the center of
the Double Rafters.
Roof Assembly
Step:159
Step:158
Continue to tighten all the Roof Bolts at the Ridge
and all the Post locations.
Locate the Cross Ties.
Continue installing all remaining Band Boards. Using a
Tighten all Roof Bolts that were previously
installed.
Step:160 Step:161
Step:163Step:162
Align Here
Screw
Locations
Cross Ties