Installation Guide

29
Install a Washer and Nut on the opposite end of the
Roof Bolt. Only hand tighten for now.
Set the Roof Panel on top of the Post as shown.
Keep pushing up until the holes in the Rafters are
aligned with the holes on the Post.
Using a Prepared Roof Bolt, push through the
Pre-Drilled Holes.
Roof Assembly

Step:134
Step:136
Step:135
Step:137
Step:138
Repeat Steps 136-138 to fasten the opposite end of
the Roof Panel.
Step:139
Washer
Nut