Installation Guide
 23
Post and Rail Assembly 
Step:104 Step:105
Step:107Step:106
Step:108
Measure the opening at the top of the doorway.
Center Post on the Deck Board splice. Space each post an equal distance from the edge of 
the Deck Boards.
After all Posts and the Doorway are equally spaced 
and aligned, Fasten Posts to Deck Boards using 
four (4) 2 
the Deck Boards at each corner using four (4) 2 
White Screws.
If You did not
purchase a oor with 
your gazebo, use the
following steps to fasten 
the post.
See next page for the post 
layout measurements.
Now measure the bottom of the doorway and
adjust the Post to make the same dimension as the 
top.
Floor Splice










