Installation Guide

21
Step:93
Step:94
Step:96
Step:95
Step:97
Post and Rail Assembly
Push Railing sections tight against post and attach
using 1’’ Pan Head Screws through pre-drilled
holes as shown. One (1) Screw on the outside and
one (1) on the inside.
Install all remaining Railing Sections, as shown in
previous steps.
Locate the Brace Sections.
Place the Grooved Slot over vinyl sleeve.
Your gazebo should look the same as the above
assembly with railings installed.
Step:92
Slide top and bottom Railing pieces onto Railing
Inserts as Shown.