Installation Guide

19
Step:81
Step:82
Step:84
Step:83
Step:85
Post and Rail Assembly
Long point facing
inside of gazebo
Locate the Door Post.
The Door Post has two Railing Inserts only.
Ensure the long point is facing up and towards the
inside of the gazebo.
Locate the Bottom Rail Pieces
Slide Bottom Rail onto the Railing Insert, making
sure the Spindle holes are facing up. Use the provided
Spacer Block to hold the other end. (Note: make sure
the Bottom Rail is tight against the Post.)
Fasten Bottom Rail to the Railing Insert on the
outside using one (1) 1’’ Pan Head Screw.
Fasten Bottom Rail to the Railing Insert on the
inside using one (1) 1’’ Pan Head Screw.
Railing
Inserts
Install all remaining Floor Trim, as shown in
previous steps.
Step:80