Installation Guide

15
There will be a gap between each Deck Board.
Adjust the Deck Boards so there is an equal gap
between each Deck Board.
Align the Deck Board with the center of the
Double Floor Joist. Fasten with 2 
through pre-drilled holes. Two (2) Screws into each
end of each Deck Board.
Keeping the Deck Boards aligned with the center
of the Double Floor Joist and keeping an equal gap
between each Deck Board, fasten both ends of all
remaining Deck Boards with 2 
through pre-drilled holes..
Floor Assembly
Fasten at both ends using one (1) 2 
through pre-drilled holes.
Install two (2) more Screws in the center.
Step:55 Step:56
Step:58
Step:57
Step:60
Step:59
Fasten the ends of all remaining Deck Boards.