Use and Care Manual

Step 2.
Place the 108” 4x4 posts (1A) in place.
The pre-drilled holes need to be aligned with the holes in the
2x6’s.
Step 3.

with acorn nuts and washers. (6A, 6B, 6C)

Step 4.
Once the 4x4 posts are installed measure across the corners to
ensure the tower is square.
Step 1.
Begin the assembly by placing four 44” 2x6’s (1B) in a square. Place
a corner bracket (6G) at each corner.
Notice how the holes in the 2x6’s and the corner brackets are
