Use and Care Manual

Congratulations on nishing your build!
Step 6.
Place the 2x4’s with the tarp roof (2D) in place as shown.

Use 3” lags in the pre-drilled holes to fasten them.
Step 4.
Place the 2x4’s with the brackets in the center of the 68” 2x4’s
with the brackets facing in.
Use 1 ¾” washer head screws to fasten the brackets.
Step 5.
Place the 49” 2x4 (2B) on top of 30” 2x4’s and fasten it with 3” lags.