Owner Manual

7
(26) Be sure to alternate top wall
plate splices.
(28) Repeat the process for the rest
of the wall studs; but use four 3”
screws as shown, for any splice.
(27) Insert two 3” screws through
the pre-drilled holes to attach bot-
tom plate to each wall stud. Make
sure bottom plate and wall studs
are flush.
(32) Lay out siding as shown here,
with the overlap towards the left.
(33) Place the siding even with the
center of the double top plate, and
1/2” out over the wall stud.
(34) Nail this corner with one 2”
nail, before moving to the next
step.
(29) Attach all wall studs to top
and bottom and wall plate.
(30) Before fastening the double
top wall plate, ensure that dado
grooves align with wall studs, and
are faced outward.
(31) Attach top plate, using 3”
screws.
[phone] - [e-mail]
Install Back Wall Siding