Owner Manual

22
(161) Install the door spring fas-
tener, using two 1-1/4” black
screws.
(163) Fasten the crosstie, using 3”
screws. Note: Divide the crosstie
out equally.
(162) Fasten the other section of
the spring to the door, using two
1-1/4” black screws.
(167) Lay out the ramp pieces, if
you got a floor with this unit.
Note: You will need to cut one 6’
board in half for the cross pieces.
(168) Attach cross piece 12” up
from end of ramp.
(169) Attach crosspieces to ramp
boards, using two 2” screws per
board. Countersink the screws ap-
proximately 1/4”
Repeat this method for the op-
posite end of the ramp.
(164) Install hurricane ties, using
1-1/4” screws.
(165) Correct! (166) Repeat for all the other raf-
ters, on both the front and back.
[phone] - [e-mail]
Interior
(Skip the ramp steps if you did not get a floor with the package)
Assemble Ramp