Owner Manual

12
(71) Properly secure or brace the
front wall, then move to next step.
(73) Completed! (72) Cut out bottom plate at door
opening, using a sawzaw.
(77) Fasten to floor, using 3”
screws, every 12 to 14 inches, try-
ing to hit the floor joist.
(78) Align gable wall framing flush
with back wall framing and attach
using 3” screws, every 8 to 12
inches. Repeat the process on oppo-
site end.
(79) Repeat steps 74 to 78 for op-
posite gable.
(74) Locate and lay out the parts to
assemble the gable wall.
(75) Attach all wall studs to top
and bottom wall plate.
(76) Set the gable wall.
[phone] - [e-mail]
Assemble Gable Wall