Owner Manual

10
(53) Fasten to floor, using two 3”
screws at every stud, trying to hit
the floor joists.
(55) Attach bottom edge of siding
to floor, using an 8” to 12” nail
spacing. Do not leave the back
wall standing alone for a long
period of time, without firmly
bracing it.
(54) Repeat for the rest of the wall,
again; making sure wall is in
against the floor frame.
(59) Fasten door studs with dados,
to the door header, using four 3”
screws.
(60) Toe screw door header to door
blocks, as shown.
(61) Fasten the other studs, using
the same pattern as the back wall.
(56) Locate and lay out the parts to
assemble the front wall.
Note: Front wall plates have ex-
tra dados for the door and win-
dow.
(57) Front wall is done much the
same as the back wall except for
the door and window studs.
Locate double studs with dado for
the door, and single studs with
dado for the windows.
(58) Fasten window studs with
dados, to the window blocks, using
two 3” screws.
[phone] - [e-mail]
Assemble Front Wall Frame