Use and Care Manual

8
[phone] - [e-mail]
(35) Nail the rest of the flooring,
using the previous steps, and using
the layout shown.
(36) Done with the floor! (34) Be sure to alternate the floor-
ing.
Assemble Back Wall Frame
(40) Repeat the process for the rest
of the bottom plate; but use four 3”
screws as shown, for any splice.
(39) Insert two 3” screws through
the pre-drilled holes to attach bot-
tom plate to each wall stud. Make
sure bottom plate and wall studs
are flush.
(38) Be sure to alternate the dou-
ble, top wall plate splices.
(37) Locate and lay out the parts to
assemble the back wall.
Note: (Dados are 24” on center)
Single plate belongs towards the
bottom, and double plate to-
wards the top.