Use and Care Manual

[phone] - [e-mail]
5
(13) Flip the joist.
(15) Note: The two end joists will only
have one OSB scab.
(10) Locate the parts to assemble the
floor joists.
(11) Push joists tightly together, and
align the OSB scabs flush with the floor
joists. Then; nail the OSB scab, using
twelve 2” nails per scab.
(12) Nail the OSB scab, using twelve 2”
nails per scab.
Assemble Floor
(14) Repeat on opposite side. Do the
same for all the other joists except the two
end joists, as shown in next step.