Use and Care Manual

22
[phone] - [e-mail]
(158) Align trim flush with edge of
siding and attach, using two - 2”
trim nails spaced every 12 to 14
inches.
(160) Fasten the top piece, making
sure you divide it out evenly
across the top.
(159) Repeat for the other side,
making sure the trim to trim open-
ing is 72” before nailing. Check
the measurement on the middle
and bottom as well.
(164) ) Position the doors where
you want them.
(165) Find the hardware bag and
locate the following.
(166) Start with the left door, and
fasten to trim using 2-1/2” black
screws, and making sure you keep
the top of the door down from the
trim, approximately 1/4”.
(161) Install diamond plate as
shown, using two 2” nails every 10
to 12 inches.
(162) Nail poly strip just below the
diamond plate, using 2” trim nails
and dividing it out evenly from left
to right.
(163) Install shutters, using six
white screws per shutter. Repeat
for other window. *If applicable*
Install Door Trim And Shutters
Install Doors