Use and Care Manual

14
[phone] - [e-mail]
(86) Finish nailing the rest of the
siding pieces on the front wall.
(88) Set the front wall and secure
properly, repeating steps (65 to 73)
(87) Cut the end of the siding, re-
peating steps (55 to 57) Then, in-
stall soffit, repeating steps (59 to
64) NOTE: Install soffit, starting
on the same end as the previous
wall.
(92) Fasten the bottom plate to the
floor, using 3” screws, every 12 to
14 inches, making sure the bottom
plate is flush with the floor joist.
(93) Align gable wall framing flush
with back wall framing and attach
using 3” screws, every 12 to 14
inches.
Repeat the process on front side.
(94) Repeat the previous steps on
the other gable.
(89) Locate and lay out the parts to
assemble the gable wall.
(90) Attach all wall studs to top
and bottom and wall plates.
(91) Set the gable wall.
Assemble Gable Wall Frames