Use and Care Manual

12
[phone] - [e-mail]
(68) Fasten to floor, using two 3”
screws at every stud, trying to hit
the floor joists.
(70) Fasten the bottom wall plate
at every floor joist, using two 3”
screws.
(69) Repeat for the rest of the wall,
again; making sure wall is in
against the floor frame.
(74) Locate and lay out the parts to
assemble the front wall. (Refer to
drawings for door & window
placements)
(75) Front wall is done much the
same as the back wall except for the
door and window studs. Locate
double studs with dados for the
door, and single studs with dados
for the windows.
(76) Fasten window studs with
dados, to the window blocks, using
two 3” screws.
(71) Attach bottom edge of siding
to floor, using an 8” to 12” nail
spacing.
(72) Repeat along the rest of the
wall.
(73) Done!
Make sure the wall is fastened se-
curely before moving to front wall.
Assemble Front Wall Frame