Product Manual

15
5. Reset carburetor jet (Authorized
workshop recommended).
7. Check battery voltage. Make
sure alternator is charging the
battery.
Engine Overheats 1. Engine is dirty. Poor cooling.
2. Low oil
1. Clean outer debris from the
engine.
2. Check and add oil if necessary.
Engine is erratic 1. Low fuel
2. Water or dirt in the fuel system.
Stale fuel.
3. Valve tolerance out of
specification.
3. Gas tank too hot.
4. Spark plugs
1. Check fuel level.
2. Refill tank with fresh fuel. Drain
fuel system if water or debris is
present or stale.
3. Open tank cap to allow excess
pressure gas buildup inside tank.
SPARE PARTS LIST
These are some of the most common re-order parts. You may order parts from our website or feel free to call us
and place your order.
COMPONENT PART NUMBER
# PART 652501 | CHIPPER BLADE
# PART 652502 | TOP ANVIL