Spec Sheet

Yardbeast 3514 Specifications
last update 11/16
Chipper
Chipping capacity: 3.5"
Rotor RPM: 3,000
Rotor Weight: 56 lbs.
Blade: D2 Tool Steel Blade
Blade dimensions: 5.82" x 2.33"
Rotor Construction 7/16" wafer front disc with 1/4" rotor vanes
Flywheel: 17.32"
Feed Hopper: 24" x 11"
Frame construction: 7-ga steel. Weld seams all around
Bearing units: SKF® roller sealed bearings /custom steel housing
Discharge height: 54.7"
Control: Discharge deflector
Chipper Weight (w/engine):
320 lbs
Engine
Make: Kohler CH440 Command Pro® 14HP engine
RPM: 3,600
Torque: 19.8ft-lb @ 2,400RPM
Dry Weight: 72.8 Lbs
Displacement: 429 cc
Oil Capacity 1.4 quarts (1.3 Lts)
Fuel Capacity 7.0 Lts
Emissions CARB Tier III certified
Transmission:
Drive: NORAM® Heavy Duty centrifugal clutch
Belts 2- Gates® Hi-Power II B64 Belts
Rotor Pulley: Cast Iron 2-groove pulley with 1-3/8" taper hub
Trailer:
Wheels: 4 - 10" Dia. Pneumatic Wheels
Frame construciont: 1/8" thick steel with engine base tension plate
Guards: Belt Guard with 3-point support
Rear Axle: Fixed, 1/8" Steel thick 21-1/4" wide
Front Axle: Pivoting. 1/8" Steel thick, 21-1/4" wide
Hand tow bar length 37.5"