Product Manual

8
Installation and Setup
Steel Cage Contents:
1 Wood Chipper
1 Discharge neck
1 Feed hopper.
1Bag of nuts and bolts that includes:
Bolts, washers, nuts, cotter pins, link pins, etc.
2 Axles (Rotating, Fixed)
4 Wheels
1 Pull Bar
Manuals and Operator safety accesories.
Assembly of the YARDBEAST 3514
Note: This unit is shipped without fuel and
without oil in the engine. Fill with gasoline
(depending on the engine type) and oil as
indicated in the instructions on the engine
manual BEFORE operating your wood
chipper.
 Remove shipping steel cage.
1. Remove plastic packing
2. Unscrew each leg of the metal cage as
shown in next Figure.
3. Pull upwards (use help of another person if
possible) as shown in next Figure.
4. Remove the chipper by removing the
platform anchor plates used for shipping.
See Fig .
 Axle Assembly
1. Insert front axle and bolt it as shown in Fig.
a. 4 Hex Bolts 3/8 "x 1"
b. 4 Hex Nuts 3/8 "
c. 4 Pressure Washers 3/8 "
d. Plain Washers 4 3/8 "