Product Manual

you must leave a space of
approximately 3/32” (2.38mm). This
clearance is important to gu
aran
chipping performance
3. Make sure that the bolts are
tightened.
Storage of your unit.
1. Care must be taken to prevent
rust on the surfaces. Cover all
equipment with a light coat of oil and use
an oil-
soaked cloth for cleaning all
equipment. Then
cover the chipper with a
big plastic bag to prevent the
environmental co
nditions from harming the
equipment.
2. Follow the off-
season storage
recommendations for the
engine
3. Store equipment in a clean, dry area.
Never store the machine or fuel container
where there is an enclosed space, fire
presence, spark
or pilot light such as water
heaters,
furnaces, clothes dryers, etc.
What to d
o with the metal cage
package?
You may modify the box as storage
purposes, or you can cut it with a hand saw
into little pieces. These can disposed in local
garbage afterwards if needed.
Anvil
approximately 3/32” (2.38mm). This
aran
tee best
1. Care must be taken to prevent
equipment with a light coat of oil and use
soaked cloth for cleaning all
cover the chipper with a
nditions from harming the
season storage
lubrication
engine
.
3. Store equipment in a clean, dry area.
Never store the machine or fuel container
where there is an enclosed space, fire
or pilot light such as water
furnaces, clothes dryers, etc.
o with the metal cage
You may modify the box as storage
purposes, or you can cut it with a hand saw
into little pieces. These can disposed in local
CAUTION
Wear leather gloves to protect your
hands when cutting the corners.
Got
questions?
Please contact us at:
www.yardbeast.com
(Customer Contact Form)
Or you may call us at:
[phone]
Or send us an email
[e-mail]
16
Wear leather gloves to protect your
hands when cutting the corners.
questions?
Please contact us at:
www.yardbeast.com
(Customer Contact Form)
Or you may call us at:
at:
[e-mail]