Product Manual

be checked at least once before
each use.
4
.Periodically check all bolts, nuts, safety
pins, etc.
WARNING
Stop the engine and disconnect
the spark plug before servicing
equipment.
Lubrication
1.Lubricate the rotating elements such as
rotor,
engine shaft, to prevent rust. bearings
are sealed and they don't need lubrication.
2.Follow engine manual for engine
lubrication instructions.
Wood Chipper maintenance ch
Before each use
•Check the belt
•Check the blade and anvil
Every 25 hours
• Bearings are sealed so they don’t need
lube
• Regrind blade at 30 degree angl
e
• Regrind anvil
Engine Maintenance
Use only original spare parts for the engine.
Other parts may no
t perform as well
damaging the unit; and may cause injury.
Moreover, the use of other parts may void
your warranty.
Exhaust Gases Control
Maintenance, replacement or repair of
devices and emission control systems may
be performed by any manufactur
authorized establishment for these engines.
Refer to engine manual for more information
or contact us. We will be glad to help.
WARNING
Unintentional sparking can result in
fire or electric shock.
be checked at least once before
.Periodically check all bolts, nuts, safety
Stop the engine and disconnect
1.Lubricate the rotating elements such as
engine shaft, to prevent rust. bearings
are sealed and they don't need lubrication.
2.Follow engine manual for engine
Wood Chipper maintenance ch
art.
• Bearings are sealed so they don’t need
e
.
Use only original spare parts for the engine.
t perform as well
damaging the unit; and may cause injury.
Moreover, the use of other parts may void
Maintenance, replacement or repair of
devices and emission control systems may
be performed by any manufactur
er
authorized establishment for these engines.
Refer to engine manual for more information
or contact us. We will be glad to help.
Unintentional sparking can result in
Before making adjustments or repair
into the unit.
• Disconnect the spark plug.
• Disconnect battery at negative terminal
(only engines with electric start).
• Use only correct tools.
• Replacement parts must be the same and
installed in the same position as the original
parts.
• Do not strik
e the flywheel with a hammer
or hard metal object. Bearings
load.
When checking for sparks
•Use an approved tester.
•Do not check for spark with spark arrestor
removed.
Engine Maintenance chart
First 5 hours of use
•Change oil
Every 8
hours of use or daily (commercial)
•Check Oil Level.
•Clean exhaust area, controls and air intake.
•Clean recoil grille.
Every 25 hours of use
•Clean air filter**
•Replace Oil Filter
(
i
f
i
n
d
i
c
a
t
e
•Check muffler and spark arrestor
Every 50 hours of use
•Change engine oil.
•Replace Oil Filter
•Check muffler and spark arrestor
Every year
•Change air filter**
•Replace pre-filter(if fitted)
•Replace spark plug
•
Clean air cooling components
•Replace Fuel Filter (if
equipped)
•Check valve tolerance*
** Clean filters and air intakes more often in
dusty
conditions or when there
density of airborne particle
s
* Not required unless engine performance
14
Before making adjustments or repair
• Disconnect the spark plug.
• Disconnect battery at negative terminal
(only engines with electric start).
• Replacement parts must be the same and
installed in the same position as the original
e the flywheel with a hammer
or hard metal object. Bearings
do suffer the
When checking for sparks
•Do not check for spark with spark arrestor
Engine Maintenance chart
.
hours of use or daily (commercial)
•Clean exhaust area, controls and air intake.
d
b
y
e
n
g
i
n
e
m
f
r
.
)
•Check muffler and spark arrestor
•Check muffler and spark arrestor
Clean air cooling components
equipped)
** Clean filters and air intakes more often in
conditions or when there
is high
/debris.
* Not required unless engine performance