Product Manual

 Discharge Assembly
1.Locate discharge neck
as shown in
figure and
secure it to the chipper.
2
.Make sure the carriage bolts are placed
inside out so the head is inside the
discharge.
Nuts and bolts:
a. 2 Carriage Bolts 3/8 "x 1"
b. 2 Pressure Washers 3/8 "
c.2 Flat Whashers 3/8"
d. 2 Hex nuts 3/8 "
as shown in
the
secure it to the chipper.
.Make sure the carriage bolts are placed
inside out so the head is inside the
Setting up your Wood Chipper
Fuel & Oil
Read and follow
all instructions in the
manual for more inf
ormation on
Once you have finished
wood chipper
, you must
engine for the first start.
Locate
in the top of the engine
and remove it.
should fill the tank
approximately 2.5 liters of
cl
After adding fuel, you must add oil
engine
, please remember to check the oil
type and quantity according to engine
manufacturer specifications.
WARNING
Use extreme
handling fuel.
flammable and the vapors
explosive.
Never
machine indoors
or while
running or hot.
Extinguish cigarettes
pipes and
other sources of ignition.
THIS PART IS
INTENTIONALLY LEFT
BLANK
10
Setting up your Wood Chipper
all instructions in the
engine
ormation on
this matter.
assembling your
, you must
prepare your
Locate
the fuel cap
and remove it.
You
engine with
cl
ean, fresh fuel.
After adding fuel, you must add oil
to the
, please remember to check the oil
type and quantity according to engine
manufacturer specifications.
caution when
Fuel is highly
flammable and the vapors
are
Never
fuel the
or while
the engine is
Extinguish cigarettes
, cigars,
other sources of ignition.
THIS PART IS
INTENTIONALLY LEFT
BLANK