Owner's Manual
Wood Chipper Good Practices
Good practices for the operator:
1. Check the oil and fuel level before starting the engine.
2. Do not put hands near rotating parts or power inputs . Contact with the chipper
and rotating parts –while in operation- can seriously damage fingers, hands .
3. Before operating the chipper , open it. Check and clean the rotor of foreign debris
objects , make sure the cutting chamber is empty and free of any foreign
material.
4. Thoroughly inspect all material to be chipped and remove any foreign objects -
such as nails, glass, steel wire, etc- that could cause injury to you or damage the
machine.
5. Do not attempt to chop material larger than specified in this manual. This action
puts yourself and the machine at risk.
6. Keep all guards and safety elements in place and in good condition.
7. Do not operate this machine while under the influence of alcohol or drugs.
8. Never operate this machine without good visibility or light .
9. If the engine is hot, do not touch as it may cause severe burns.
10.Do not attempt to move the chipper while the engine is running .
11.While feeding material into the machine, keep your face and body away from the
discharge zone .
12.Never attempt to unclog the outlet or discharge opening while the engine is
running. Turn off the engine and wait until all moving parts are at a complete
stop.
22