Owner's Manual

Setting up your Wood Chipper



Read and follow all instructions in the manual for more information on this

matter.



Once you have finished putting together your wood

chipper, you must prepare the engine for the first

start. Locate the fuel cap on top of the engine and

remove it. You should fill the tank with approximately

2.5 liters of clean, fresh fuel. However, due to

changes in engine model used on the chipper please

confirm proper fuel tank capacity on the engine’s

own user manual.



After adding fuel, you must add oil. Please remember

to check the oil type and quantity according to engine

manufacturer specifications. Please refer to this

quick chart below. We recommend utilizing fully

synthetic oil for better performance. If you will be

utilizing the chipper in different seasons with

significant temperature variations, please make sure

to understand the chart below for specific oils better

suited to your requirements. Please check the engine

manual for oil quantity recommendations. After filling with oil please wait a few

seconds for oil to settle inside when measuring with the dipstick.



OIL TYPE RECOMMENDATIONS (KOHLER COMMAND PRO ENGINE CLASS)

