Spec Sheet

Yardbeast 2090 Specifications
last update 12/16
Chipper
Chipping capacity: 3.5"
Shredding capacity: 3/4"
Rotor RPM: 3,000
Rotor Weight: 61 lbs
Blade: Hardened Steel treated blade
Blade dimensions: 4.40" x 2.32"
Shredding hammers: 24- Impact hammers
Shredding flails: 6- Shredding flails
Rotor Construction 7/16" wafer front disc with 1/4" rotor vanes and hammer rods
Flywheel: 13.46"
Feed Hopper: 17" x 10"
Frame construction: 7-ga steel on frame and 10-ga steel on else
Bearing units: SKF® bearings units
Discharge height: Ground floor
Control: Discharge deflector
Chipper Weight (w/engine):
420 lbs
Engine
Make: Kohler CH440 Command Pro® 14HP engine
RPM: 3,600
Torque: 19.8ft-lb @ 2,400RPM
Dry Weight: 72.8 Lbs
Displacement: 429 cc
Oil Capacity 1.4 quarts (1.3 Lts)
Fuel Capacity 7.0 Lts
Emissions CARB Tier III certified
Transmission:
Drive: NORAM® Heavy Duty centrifugal clutch
Belts 2- Gates® Hi-Power II B60 Belts
Rotor Pulley: Cast Iron 2-groove pulley with 1-3/8" taper hub
Trailer:
Wheels: 2- 15" x 6.50-6 High Flotation Wheels w/bearings
Frame construciont: 1/8" thick steel with engine base tension plate
Guards: Belt Guard with 3-point support
Rear Axle: Fixed, 3/16" Steel thick with 3/4" spindles
Tow: Tow bar with hitch and pin for ATV/UTV/Garden tractor