Spec Sheet

Yardbeast 2050 Specifications
last update 12/16
Chipper
Chipping capacity: 3"
Shredding capacity: 5/8"
Rotor RPM: 2,300
Rotor Weight: 32 lbs
Blade: 2 - Hardened Steel treated blades
Blade dimensions: 4.40" x 2.32"
Rotor Construction 1/4" thick disc with 1/4" thick rotor vanes and hammer rods
Flywheel: 13.46"
Feed Hopper: 6.5" x 6"
Frame construction: 10-ga steel
Bearing units: SKF® bearings units
Discharge height: Ground floor
Control: Discharge deflector
Chipper Weight (w/engine):
260 lbs
Engine
Make: Kohler CH395 277 cc engine
RPM: 3,600
Torque: 13.9ft-lbs gross torque
Dry Weight: 61 Lbs
Displacement: 277cc
Oil Capacity 1.4 quarts (1.3 liters)
Emissions CARB Approved
Transmission:
Drive: Hilliard® Heavy Duty centrifugal clutch
Belts 1- Gates® Hi-Power II B48 Belt
Rotor Pulley: Cast Iron 1-groove pulley with 1" taper hub
Trailer:
Wheels: 2- 10" dia. pneumatic wheels/ 5/8" bearings
Frame construciont: 1/8" thick steel with 5/8" axles
Guards: Belt Guard
Tow: By hand, pivot and carry over wheels