Modular Chicken Coop OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing this product! For future reference, please complete the owner’s record below: Model: __YTF-700CC___ Purchase Date: _______________ Save the receipt, the warranty, and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
WORK AREA • Keep work area clean, free of clutter, and well-lit. Cluttered and dark work areas can cause accidents. • Keep children and bystanders away while assembling this product. PERSONAL SAFETY • Use safety apparel and equipment. Use safety glasses with side shields that comply with current national standards, while assembling this product. This applies to all persons in the work area. Also use non-skid safety shoes, hard hats, gloves, dust collection systems, and hearing protection when needed.
Step #2: Attach the Right House Panel (D) to the Front House Panel (B) and the Rear House Panel (C) using eight Screws (1). Front House Panel (B) Right House Panel (D) Rear House Panel (C) Step #3: Attach the Left Nesting Box Panel (E) and the Right Nesting Box Panel (F) to the Rear House Panel (C) using four Bolts (2) and four Nuts (3).
Step #4: Insert the Nesting Box Floor Panel (G) from the top. Attach the Rear Nesting Box Panel (H) using four Screws (6). Nesting Box Floor Panel (G) Rear Nesting Box Panel (H) Step #5: Insert the Nesting Box Partition (I) into the slots inside the Nesting Box. Attach the Nesting Box Roof Panel (J) using four Screws (5) to fasten the two hinges.
Step #6: Attach the House Roof Panels (K) using eight Screws (4). House Roof Panels (K) Step #7: Attach the Roof Cap (L) using two Screws (4). Install the Ramp (M) by placing it onto the Right House Panel (D) door frame.
Step #8: Open the two Left House Panel (A) doors and install the Roosting Bars (N) by placing them widthwise in the slots on the inside frame. Roosting Bars (N) Step #9: Install the Drawer Panel (O) by sliding it into the slot under the Left House Panel (A) doors.
Step #10: Attach the Front Pen Panel (P) and the Rear Pen Panel (Q) to the End Pen Panel (R) using six Screws (1). Rear Pen Panel (Q) Front Pen Panel (P) End Pen Panel (R) Step #11: Attach the Pen to the House using eight Screws (5) on both sides.
Step #12: Attach the Top Pen Panel (S) using four Screws (1). Top Pen Panel (S) Step #13: Attach the Looped Door Handle (T) to the Looped Door Handle Rod (U) using one Bolt (7) and one Nut (8). MAINTENANCE Cleaning Instructions: Clean with water and mild soap. Avoid harsh detergents. Dry completely.
PARTS DIAGRAM PARTS LIST Part # Description A B C D E F Left House Panel Front House Panel Rear House Panel Right House Panel Left Nesting Box Panel Right Nesting Box Panel Qt y.
For technical questions, please call 1-218-943-6290. WARRANTY One-year limited parts warranty.
