Instructions / Assembly

Page of 6

ASSEMBLY-(see parts list picture)

 Lay harrow onto ground and stretch out flat.

 Rounded heads of carriage bolts on top.

 Check all fasteners to ensure they are tight.

 Fasten item # 1 quick link onto chain at any desired position to pull

harrow straight or at angles.

 Additional weight may be added to unit by placing 8’’concrete

blocks along front as shown in figure above.

 Hold down straps may be necessary to secure blocks into place.

 After item #1 quick link is in desired position hook link into the hole

of your ATV’s hitch plate.

MAINTENANCE

• Maintain your drag harrow. It is recommended that the general condition of any drag harrow

be examined before it is used. Keep your drag harrow in good repair by adopting a program of

conscientious repair and maintenance. If any abnormal vibrations or noise occurs, have the

problem corrected before further use. Have necessary repairs made by qualified service

personnel.