Landscape Drag OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing this product! For future reference, please complete the owner’s record below: Model: ______ATV-LD_______ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
WORK AREA (During Assembly and Operation) • Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. • Keep children and bystanders away while operating a landscape drag. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area.
ASSEMBLY Step 1 Step 2 Step 3 Connect the Right Long Steel Angle to the Left Long Steel Angle using the hex bolts and locknuts as shown. Connect the Right Short Steel Angle to the Left Short Steel Angle using the hex bolts and locknuts as shown. Connect the Front Steel Angle Assembly to the Rear Steel Angle Assembly using the two Steel Angle Supports, connect using 2 Spacers, Hex Bolt M10X35 and M10 Locknut.
Step 4 Connect the Front Steel Angle Assembly to the Rear Steel Angle Assembly with the two Steel Connecting Straps using the Hex Bolt and Lock Nut. (4 Places) Step 5 Connect the Tongue to the Main frame using the Hex Bolt and Lock Nuts. Install the Hitch pin and the R pin into Tongue. MAINTENANCE • Maintain your landscape. It is recommended that the general condition of any landscape drag be examined before it is used.
DIAGRAM & PARTS LIST PART# DESC QTY PART# DESC QTY 1 Right long angle steel 1 8 Long connecter steel bar 2 2 Lock Nut M10 16 9 Left small angle steel 1 3 Bolt M10×20 11 10 Right small angel steel 1 4 Spacer 8 11 Bolt M10×55 1 5 Bolt M10×35 4 12 Tongue 1 6 Left long angle steel 1 13 R Pin Ø3 1 7 Connecter steel bar 2 14 Cup head pin 1 For replacement parts and technical questions, please call 1-218-943-6296.
