Product Manual
8
Step4:
1. Connect the hopper assembly (#22) and hopper assemble tube (#14) using hex bolt
M6x40 (#11) and hex lock nut M6 (#9), then tighten.
2. Connect the gauge base plate(#34) and hopper assembly (#22) using hex bolt
M6x16(#8), big flat washer Ø6 (#23) and hex lock nut M6 (#9).
Step 5:
Tighten all the nuts and bolts. Then plug-in the cable, and connect the other end of the
cable with the cable on the motor.
Be sure to use straps as needed to secure the spreader to the vehicle.