Specifications

Observe:
Visually check the wiring and check the wire path
for the possibility of a pinched or shorted / broken
wire
If the coil shows a resistance reading of around 90
to 160 Ohms, at approximately 70 degrees
Fahrenheit, the coil windings are good
Still will not start: Move on
If you have ignition and it still appears to be a fuel
issue, consider rebuilding the carburetor. It is
cheaper to stock rebuilding kits then it is stocking
various carburetors; generally Walbro or Zama
Carburetor Kits
Observe:
Observe:
Visually check the wiring and check the wire path
for the possibility of a pinched or shorted / broken
wire
If the coil shows a resistance reading of around 90
to 160 Ohms, at approximately 70 degrees
Fahrenheit, the coil windings are good
Still will not start: Move on
Still will not start: Move on
If you have ignition and it still appears to be a fuel
issue, consider rebuilding the carburetor. It is
cheaper to stock rebuilding kits then it is stocking
various carburetors; generally Walbro or Zama
Carburetor Kits