Operator`s manual

5. An adjustingplateandthumbleverat each wheel
positionprovidescuttingheightadjustment.
a. Depresslevertowardswheel.
b. Moveit to anyof the ninepositionsfor desired
cutting height.SeeStep 5.
c. Releaselevertowardsmowerdeck.
6. Followstepsbelowto assemblethe grasscatcher:
a. Placebagoverframesothat itsblackplasticside
is at the bottom.
b. Slip plasticchannelof grassbagoverhooksonthe
frame.SeeStep6. All the plasticchannelsexcept
centertop of bagattachfromoutsideof bag.
c. Attachcentertop of bagfrominsideof bag.
7. Followstepsbelowto attachgrasscatcher:
a. Liftreardischargedoor.
b. Placegrasscatcheron thepivotrod. Letgo
of dischargedoorsothat it restson thegrass
catcher.SeeStep7.
To removegrasscatcherorconvertto a mulcher,lift rear
dischargedooron the moweras showninStep8. Lift
grasscatcherupandout of the pivotrod.Releaserear
dischargedoorto allow it to closerearopeningof mower.
_IL ARNING: Never operate mower
unless the hooks on the grass
catcherare firmly seated in the
slotson the handle bracket as-
semblies, and the rear discharge
door rests firmly against top of
the grass catcher.
Step 5
Step 6
.,)
\
..... J
Step 7
7
uStment
CUTTING HEIGHT
Step5
All wheelsmust be
placedin the same
relative positionl
GRASS CATCHER
Stepe
Makecertain bag is
turned right side out
before assembling
(warning label Willbe
on the outside):
WARNING
Never operate mower
unlessthe hooks on
the grasscatcher are
firmly seated in the
slots on the handle
bracket assemblies,
and the rear dis-
charge door rests
firmly against top of
the grasscatcher.