User`s guide

30 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1070 • April 2008
Identifying Permanent Memory in a Target Board
▼ To Identify Permanent Memory in a Target Board
1. Log in to XSCF and type the following command:
The following example shows a display of the showdevices -d command where 0
is the domain_id.
# prtdiag
...
============================ Memory Configuration ============================
Memory Available Memory DIMM # of Mirror Interleave
LSB Group Size Status Size DIMMs Mode Factor
--- ------ ------------------ ------- ------ ----- ------- ----------
00 A 32768MB okay 2048MB 16 no 8-way
00 B 32768MB okay 2048MB 16 no 8-way
03 A 8192MB okay 2048MB 4 no 2-way
03 B 8192MB okay 2048MB 4 no 2-way
04 A 8192MB okay 2048MB 4 no 2-way
04 B 8192MB okay 2048MB 4 no 2-way
05 A 8192MB okay 2048MB 4 no 2-way
05 B 8192MB okay 2048MB 4 no 2-way
06 A 8192MB okay 2048MB 4 no 2-way
...
XSCF> showdevices -d domain_id